Microstructure and mechanical properties of the 2D C/SiC/TC4 joints brazed with Cu-Ti + Mo

CORC > 长春光学精密机械与物理研究所 > 中国科学院长春光学精密机械与物理研究所 > 中科院长春光机所知识产出 > 会议论文

	Microstructure and mechanical properties of the 2D C/SiC/TC4 joints brazed with Cu-Ti + Mo
	Yang H. ; Fan S. ; Wang X. ; Cheng L. ; Zhang L.
	2014
会议名称	8th High Temperature Ceramic Matrix Composites Conference, HTCMC 2013, September 22, 2013 - September 26, 2013
会议地点	Xi'an, Shaanxi, China
页码	271-278
英文摘要	Two-dimension carbon fiber reinforced silicon carbide ceramic matrix (2D C/SiC) composites were vacuum brazed to TC4 alloy using Cu-Ti + Mo composite filler. Effect of Mo content on the microstructure and mechanical properties of the joints were investigated. The results showed that joints were composed of four regions: a interface reaction layer, a stress relief layer, a residual Cu layer and a diffusion layer. With the increased Mo content, the flexural strength increased at first then decreased. The maximum flexural strength reached 130 MPa with 10 vol.% Mo particles in the filler.
收录类别	EI
会议录	8th High Temperature Ceramic Matrix Composites Conference, HTCMC 2013, September 22, 2013 - September 26, 2013
会议录出版者	American Ceramic Society
会议录出版地	Xi'an, Shaanxi, China
语种	英语
内容类型	会议论文
源URL	[http://ir.ciomp.ac.cn/handle/181722/44563]
专题	长春光学精密机械与物理研究所_中科院长春光机所知识产出_会议论文
推荐引用方式 GB/T 7714	Yang H.,Fan S.,Wang X.,et al. Microstructure and mechanical properties of the 2D C/SiC/TC4 joints brazed with Cu-Ti + Mo[C]. 见:8th High Temperature Ceramic Matrix Composites Conference, HTCMC 2013, September 22, 2013 - September 26, 2013. Xi'an, Shaanxi, China.