Phase field simulation of the stress-induced alpha microstructure in Ti-6Al-4 V alloy and its CPFEM properties evaluation

doi:10.1016/j.jmst.2020.12.085

CORC > 金属研究所 > 中国科学院金属研究所

	Phase field simulation of the stress-induced alpha microstructure in Ti-6Al-4 V alloy and its CPFEM properties evaluation
	Zhang, Jinhu 1,2; Li, Xuexiong 1,2; Xu, Dongsheng 1,2,4; Teng, Chunyu 3; Wang, Hao 1,2; Yang, Liang 1,2; Ju, Hongtao 1,2,4; Xu, Haisheng 1,2,4; Meng, Zhichao 1,2,4; Ma, Yingjie 1,2,4
刊名	JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
	2021-11-10
卷号	90 页码:168-182
关键词	Titanium alloy Phase transformation Microtexture Mechanical evaluation Phase field Crystal plasticity finite element
ISSN号	1005-0302
DOI	10.1016/j.jmst.2020.12.085
通讯作者	Zhang, Jinhu(jinhuzhang@imr.ac.cn) ; Xu, Dongsheng(dsxu@imr.ac.cn)
英文摘要	Variant selection under specific applied stresses during precipitation of alpha plates from prior-beta matrix in Ti-6Al-4 V was investigated by 3D phase field simulations. The model incorporates the Burgers transformation path from beta to alpha phase, with consideration of interfacial energy anisotropy, externally applied stresses and elastic interactions among alpha variants and beta matrix. The Gibbs free energy and atomic mobility data are taken from available thermodynamic and kinetic databases. It was found that external stresses have a profound influence on variant selection, and the selection has a sensitive dependence, as evidenced by both interaction energy calculations and phase field simulations. Compared with normal stresses, shear stresses applied in certain directions were found more effective in accelerating the transformation, with a stronger preference to fewer variants. The volume fractions of various alpha variants and the final microstructure were determined by both the external stress and the elastic interaction among different variants. The alpha clusters formed by variants with Type2 misorientation ([1 1 -2 0]/60 degrees) relation were found more favored than those with Type4 ([-10 5 5 -3]/63.26 degrees) under certain applied tensile stress such as along < 111 >(beta). The mechanical properties of different microstructures from our phase field simulation under different conditions were calculated for different loading conditions, utilizing crystal plastic finite element simulation. The mechanical behavior of the various microstructures from phase field simulation can be evaluated well before the alloys are fabricated, and therefore it is possible to select microstructure for optimizing the mechanical properties of the alloy through thermomechanical processing based on the two types of simulations. (C) 2021 Published by Elsevier Ltd on behalf of Chinese Society for Metals.
资助项目	National Key Research and Development Program of China[2016YFB0701304] ; National Key Research and Development Program of China[2016YFC0304200] ; Strategic Priority Research Program of Chinese Academy of Sciences[XDC01040100] ; Special Project on Information Technology of the Chinese Academy of Sciences[XXH13506-304] ; Doctoral Scientific Research Foundation of Liaoning Province[20180540133] ; CAS-Shenyang Supercomputing Center
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
语种	英语
出版者	JOURNAL MATER SCI TECHNOL
WOS记录号	WOS:000717448900007
资助机构	National Key Research and Development Program of China ; Strategic Priority Research Program of Chinese Academy of Sciences ; Special Project on Information Technology of the Chinese Academy of Sciences ; Doctoral Scientific Research Foundation of Liaoning Province ; CAS-Shenyang Supercomputing Center
内容类型	期刊论文
源URL	[http://ir.imr.ac.cn/handle/321006/167187]
专题	金属研究所_中国科学院金属研究所
通讯作者	Zhang, Jinhu; Xu, Dongsheng
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shichangxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China 3.China Aeropolytechnol Estab, Beijing 100028, Peoples R China 4.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China 5.Ohio State Univ, Dept Mat Sci & Engn, 2041 Coll Rd, Columbus, OH 43210 USA
推荐引用方式 GB/T 7714	Zhang, Jinhu,Li, Xuexiong,Xu, Dongsheng,et al. Phase field simulation of the stress-induced alpha microstructure in Ti-6Al-4 V alloy and its CPFEM properties evaluation[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2021,90:168-182.
APA	Zhang, Jinhu.,Li, Xuexiong.,Xu, Dongsheng.,Teng, Chunyu.,Wang, Hao.,...&Yang, Rui.(2021).Phase field simulation of the stress-induced alpha microstructure in Ti-6Al-4 V alloy and its CPFEM properties evaluation.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,90,168-182.
MLA	Zhang, Jinhu,et al."Phase field simulation of the stress-induced alpha microstructure in Ti-6Al-4 V alloy and its CPFEM properties evaluation".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 90(2021):168-182.