Simulation and practice of particle inertial focusing in 3D-printed serpentine microfluidic chips via commercial 3D-printers | |
Yin, Pengju3; Zhao, Lei3; Chen, Zezhou3; Jiao, Zhiqiang3; Shi, Hongyan3; Hu, Bo3; Yuan, Shifang1; Tian, Jie2,3 | |
刊名 | SOFT MATTER |
2020-03-28 | |
卷号 | 16期号:12页码:3096-3105 |
ISSN号 | 1744-683X |
DOI | 10.1039/d0sm00084a |
通讯作者 | Hu, Bo(bohu@xidian.edu.cn) ; Yuan, Shifang(shifangy@fmmu.edu.cn) ; Tian, Jie(jie.tian@ia.ac.cn) |
英文摘要 | Inertial focusing of particles in serpentine microfluidic chips has been studied over the past decade. Here, a study to investigate the particle inertial focusing in 3D-printed serpentine microfluidic chips was conducted by simulation and practice. A test model was designed and printed using four commercial 3D-printers. Commercial inkjet 3D-printers have shown the best printing channel resolution of up to 0.1 mm. The force analysis of particle inertial focusing in 3D-printed microfluidic chips with large cross-sectional channels was discussed. Important parameters such as the channel curvature and flow velocity were studied by simulation. The optimal channel curvature and flow velocity are 5.9 mm and 480 mu L min(-1) (Re: 29.8 and De: 4.49) in the 3D-printed microfluidic chips with 0.2 mm x 0.4 mm cross-sectional channels. Under these optimal conditions, particles were well focused in the middle of the channel. Furthermore, two kinds of cancer cells were focused in these 3D-printed serpentine microfluidic chips under the optimal conditions. We envision that this improved study would provide helpful insights into simulating particle inertial focusing in 3D-printed microfluidic chips and promoting 3D-printed microfluidic chips to commercial production. |
资助项目 | National Key Research and Development Program of China[2016YFC0102000] ; National Key Research and Development Program of China[2017YFA0205202] ; National Natural Science Foundation of China[81772011] ; National Natural Science Foundation of China[31800714] ; 100 Talents Project of Shaanxi Province, China[SXBR9181] ; Natural Science Basic Research Plan in Shaanxi Province of China[2018JQ3027] ; Fundamental Research Funds for the Central Universities[JC1907] ; Doctoral Students' Short-Term Study Abroad Scholarship Fund of Xidian University |
WOS关键词 | POISEUILLE FLOW ; CANCER-CELLS ; SEPARATION ; DEVICES ; FUNDAMENTALS ; FABRICATION |
WOS研究方向 | Chemistry ; Materials Science ; Physics ; Polymer Science |
语种 | 英语 |
出版者 | ROYAL SOC CHEMISTRY |
WOS记录号 | WOS:000526925800017 |
资助机构 | National Key Research and Development Program of China ; National Natural Science Foundation of China ; 100 Talents Project of Shaanxi Province, China ; Natural Science Basic Research Plan in Shaanxi Province of China ; Fundamental Research Funds for the Central Universities ; Doctoral Students' Short-Term Study Abroad Scholarship Fund of Xidian University |
内容类型 | 期刊论文 |
源URL | [http://ir.ia.ac.cn/handle/173211/39355] |
专题 | 自动化研究所_中国科学院分子影像重点实验室 |
通讯作者 | Hu, Bo; Yuan, Shifang; Tian, Jie |
作者单位 | 1.Fourth Mil Med Univ, Xijing Hosp, Xian 710032, Shaanxi, Peoples R China 2.Chinese Acad Sci, Inst Automat, Beijing 100190, Peoples R China 3.Xidian Univ, Lib, Sch Life Sci & Technol, Xian 710126, Shaanxi, Peoples R China |
推荐引用方式 GB/T 7714 | Yin, Pengju,Zhao, Lei,Chen, Zezhou,et al. Simulation and practice of particle inertial focusing in 3D-printed serpentine microfluidic chips via commercial 3D-printers[J]. SOFT MATTER,2020,16(12):3096-3105. |
APA | Yin, Pengju.,Zhao, Lei.,Chen, Zezhou.,Jiao, Zhiqiang.,Shi, Hongyan.,...&Tian, Jie.(2020).Simulation and practice of particle inertial focusing in 3D-printed serpentine microfluidic chips via commercial 3D-printers.SOFT MATTER,16(12),3096-3105. |
MLA | Yin, Pengju,et al."Simulation and practice of particle inertial focusing in 3D-printed serpentine microfluidic chips via commercial 3D-printers".SOFT MATTER 16.12(2020):3096-3105. |
个性服务 |
查看访问统计 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论